Showing posts with label problem. Show all posts
Showing posts with label problem. Show all posts
Sunday, April 19, 2015
Nokia Asha 200 MIC Jumper Ways Problem Solution
This is the Nokia solution for Asha 200 Mic, mouthpiece microphone is not a problem. The solution repair guide below simply shows the paths connecting the microphone to solve problems.Nokia 1280 Contact service & No Lcd light Solution
Just follow a few simple tips on how we the microphone problem on Nokia phones Asha 200 to solve.
Nokia Asha 200 mic microphone problem can be solve with a few steps that i am going to write here if you are facing no mic voice is going forward or low voice goes to destination then you can check mic replace mic with new one.
there are two main colors in this diagram red and blue as you can see easily so these two lines are defining main path of links check these links and if any of them is broken then make these jumpers as define in diagram attached with this post.if any component is damage you can replace it also with same value parts.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Just follow a few simple tips on how we the microphone problem on Nokia phones Asha 200 to solve.
Nokia Asha 200 mic microphone problem can be solve with a few steps that i am going to write here if you are facing no mic voice is going forward or low voice goes to destination then you can check mic replace mic with new one.
there are two main colors in this diagram red and blue as you can see easily so these two lines are defining main path of links check these links and if any of them is broken then make these jumpers as define in diagram attached with this post.if any component is damage you can replace it also with same value parts.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Thursday, April 16, 2015
Nokia 2323 Classic Hang problem solution
If you are facing hanging problem in Nokia 2323 Classic. or it got auto restart.this problem can be solve with a few steps that I am going to teach here.So keep reading and look at diagram bellow.Nokia 105 display light jumper solution without transister
In above diagram you can see a jumper this jumper is used to solve hang problem in Nokia 2323 Classic. If Nokia 2323 Classic is hanging and got stuck no keyboard work and you have to shut it down.Applying this jumper will solve hanging problem.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
In above diagram you can see a jumper this jumper is used to solve hang problem in Nokia 2323 Classic. If Nokia 2323 Classic is hanging and got stuck no keyboard work and you have to shut it down.Applying this jumper will solve hanging problem.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Monday, April 13, 2015
Nokia 6700c White Blue and Blank LCD Display Problem solutions
Heres a solution that covers for Nokia 6700 classic LCD screen display problem issues, such as white screen, blue screen, blank or black screen, garbled, saturated or corrupted screen displays.
This solution may only works and can be applied after ensuring that device firmware is already restored or flashed, upgraded or updated. And also tried to installed a new replacement LCD module but the problem still exists. The solution below showed the LCD pin connector connection across the two LCD ESM-EMI filter ICs.
There are two ESD-EMI filter used in Nokia 6700 classic display circuit and mounted near the LCD pin connector. You may check the filter chips and trace each corresponding line paths through to the LCd pin connector before trying to replaced a new replacement EMI filter.
This solution may only works and can be applied after ensuring that device firmware is already restored or flashed, upgraded or updated. And also tried to installed a new replacement LCD module but the problem still exists. The solution below showed the LCD pin connector connection across the two LCD ESM-EMI filter ICs.
Nokia 6700 classic LCD Display Problem solution
Nokia 6700 Display Filter IC and LCD Pin connector connection
There are two ESD-EMI filter used in Nokia 6700 classic display circuit and mounted near the LCD pin connector. You may check the filter chips and trace each corresponding line paths through to the LCd pin connector before trying to replaced a new replacement EMI filter.
Saturday, April 4, 2015
Nokia 5800 earpiece speaker problem solution tested
Nokia 5800 can be solve with a few steps that are given in this post bellow.in this problem we will not be able to hear incommingin voice from speaker.we can use loud speaker as temporary solution.to solve it permanantly use bellow diagram.Nokia Asha 200 MIC Jumper Ways Problem Solution
as you can see in diagram above there are a few color lines that are defining tracks and parts that are used in speaker function in Nokia 5800.Change speaker and check speaker points on mother board if they have a good value.
if meter do not show any value then there can be broken path or parts so apply jumpers for path and replace components if any of them is missing or broken as shown in above diagram to solve Nokia 5800 earpiece speaker problem solution tested.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
as you can see in diagram above there are a few color lines that are defining tracks and parts that are used in speaker function in Nokia 5800.Change speaker and check speaker points on mother board if they have a good value.
if meter do not show any value then there can be broken path or parts so apply jumpers for path and replace components if any of them is missing or broken as shown in above diagram to solve Nokia 5800 earpiece speaker problem solution tested.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Thursday, April 2, 2015
Nokia 2630 White Screen blank and blue LCD display problem solution
This solution may used as a guide to fix and repair Nokia 2630 LCD screen display problems like white screen, blue screen, blank or empty screen displays.
After ensuring that the LCd screen module is okay or already tried installing a new replacement and then also ensuring that the device firmware is successfully flash or restored,
you may check and or replace the component showed on the solution below.
Check the LCD Pin Connector, make sure that is free from dirt and oxidation build up.
There are three Resistors used on the display data connections, this reistors has 100 ohms resistance value, you may check or replace this components. If the three resistors is okay and the problem still exists, you may suspect that the problem may lies on a faulty UPP CPU IC.
After ensuring that the LCd screen module is okay or already tried installing a new replacement and then also ensuring that the device firmware is successfully flash or restored,
you may check and or replace the component showed on the solution below.
Nokia 2630 White, Blank and Blue Screen Display Problem Solution
Check the LCD Pin Connector, make sure that is free from dirt and oxidation build up.
There are three Resistors used on the display data connections, this reistors has 100 ohms resistance value, you may check or replace this components. If the three resistors is okay and the problem still exists, you may suspect that the problem may lies on a faulty UPP CPU IC.
Subscribe to:
Posts (Atom)